Kit Oem New

06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit

06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit
06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit

06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit

702 Motoring Located in Las Vegas for the last 10 Years + is a Fully Functioning Car Audio & Customization Facility Stocking over 5 Million Dollars of Name Brand Merchandise. 702 MOTORING LAS VEGAS Is an Authorized Dealer and Authorized Online Retailer for. THIS ITEM PACKAGE SHIPS WITH THE. BT-HD01 HARLEY DAVIDSON BLUETOOTH MODULE.

Adds Bluetooth audio streaming to the factory radio Can be operated with the handlebar controls Will play/pause with ignition on/off Will show up on the factory radio as HDBT. APPLICATIONS HARLEY DAVIDSON (with Advanced Radio). Turn the radio on and activate the FM source. Turn the ignition key switch to the off position. Press and hold any (2) soft buttons on the radio, and then turn the ignition key switch to the on position.

The soft buttons are the numbered buttons on the radio. Continue holding the (2) soft buttons until Diag Test is displayed on the radio screen, and then let go. Press the soft key button 4 labeled Software on the radio screen. The radio screen will then show the current software version. If you do not have V8.250 or higher, please go to the following website to update the radio. Follow the instructions on the website exactly as stated. If there are any questions with that process, contact Harley Davidson. If the radio has V8.250 or higher software, press the soft button 6 to exit the diagnostic mode. Before beginning the installation, check the current software version of the radio following the steps above.

This product will not work on models with software versions lower than V8.250. Emove the 35-pin connector from the radio.

This is the larger connector of the (2) connectors in the radio. If there isnt a 35-pin connector in the radio, proceed to the next step. Connect the male end of the HD01 harness into the radio. Connect the female end of the HD01 harness into the factory connector in the vehicle.

If there wasnt a 35-pin connector in the radio, skip this step. The following (2) wires connect to the 23-pin radio connector. This is the smaller connector of the (2) connectors in the radio. The factory connector has the pin cavity locations stamped onto it. Connect the Black wire from the HD01 harness to the wire located in pin-19 of the 23-pin radio connector.

Connect the Red wire from the HD01 harness to the wire located in pin-20 of the 23-pin radio connector. Note: The HD01 can operate in two different modes: CD mode (default) or SAT mode.

If you have a factory iPod interface installed and desire to keep it, change the HD01 to SAT mode. To do this you will need to cut the Grey loop wire coming out of the HD01, and then switch the 3-pin audio wire connection to the SAT setting.

Remove (3) Torx screws from the radio. Attach the HD01 to the radio, then reinstall the (3) Torx screws, securing the HD01 to the radio.

If the 4 waterproof USB cable is desired to be used, route the USB cable out from the lower fairing to the desired location. The USB cable is designed to be mounted with a hole drilled into the fairing, if so desired. Reassemble the fairing in reverse order of disassembly. Turn the ignition key switch to the on position, and then turn on the radio. There will be a new option on the radio screen titled HDBT. Select this option, and then select Pair.

On the Bluetooth device search for HDBT, and then pair to the HD01. The UP and DN buttons will operate next/previous song, if applicable.

Button will cycle through the available sources. The soft buttons 1-6 will allow you to access the following features: Pair (1), Play/Pause (2), Random (3), Next (4) Note: After 5 seconds with no buttons being pressed, the radio will default to the main screen. Note: The HD01 supports full text on the radio screen from most streaming apps, pending the Bluetooth device supports AD2P. The item "06-13 UPGRADE FACTORY OEM FOR HARLEY DAVIDSON RADIO ADD BLUETOOTH ADAPTER KIT" is in sale since Monday, November 13, 2017.

This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Accessories\Other Motorcycle Accessories". The seller is "www-702motoringlasvegas-com" and is located in Las Vegas, Nevada. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

  • Modified Item: No
  • Custom Bundle: No
  • Can be operated with the handl: Can be operated with the handlebar controls
  • Placement on Vehicle: Front
  • Type: HARLEY DAVIDSON FACTORY RADIO BLUETOOTH INTERFACE
  • Surface Finish: BLACK
  • Manufacturer Part Number: BT-HD01
  • Brand: SADDLE TRAMP
  • Non-Domestic Product: No
  • Warranty: Yes


06-13 Upgrade Factory Oem For Harley Davidson Radio Add Bluetooth Adapter Kit