Kit Oem New

For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4

For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4

For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4
3-Bend, One-Piece, Rear Steel blocks with a built in taper for Optimal Ride Quality. Tapered Block Ensures Correct Pinion Angle of Driveshaft.

9/16th Pins, 5.8" Long x 2.5" Wide Steel Blocks. Square U-Bolts 15.75" Length , 3.25" Width, 3.95" Thread Length, 5/8" Threads. Helps to Eliminate Vibrations while Driving.

Allows Struts to Retain Full Range of Motion. Preserves Full Articulation of Front Suspension. Helps Preserve OEM Ride Quality. Precise Product Engineering for Superior Fitment.

Easy and Fast to Installation with Basic Tools. Does Not Require Replacement of Factory Parts. Gain Ground Clearance to Help Traverse Rugged Terrain.

Simple Instructions for Do It Yourself Installment. WHICH HEIGHT COMBINATION DO I NEED TO LEVEL MY TRUCK?

The best way to determine which kit you need to level your truck is to measure your current front and rear ride height from the center of the axle to the top center of the wheel well. Subtract your front and rear measurements from each other, this is the FRONT lift amount required to level the vehicle. Add height evenly front and rear to level AND lift. HOW DOES THIS LIFT KIT INSTALL ON MY VEHICLE?

These spacer kits install easily and quickly using only basic hand tools, all from the comfort of your driveway. Simply unbolt/remove your factory assembly no spring compressor required! Install the spacer on top of your original smount, and reinstall the assembly. Rear lift blocks simply install between your axle and OE leaf pack using our extended U-Bolts.

WHY ARE YOUR LIFT BLOCKS TAPERED? Our Heavy Duty lift blocks are engineered and designed with a built-in taper to help keep your differential's pinion angle as close to factory specification as possible. This helps eliminate the possibility of driveline vibration occuring due to misaligned driveshaft/differential angles, and keeps your u-joints and driveline bearings lasting longer. All of our steel components are finished using a proprietary teflon-blend coating.

This provides the most durable and corossion resistant finish to withstand even the toughest abuse, on and off-road. DO I NEED AN ALIGNMENT AFTER INSTALL? A wheel alignment is always recommended after any components of a vehicle's suspension have been altered. This includes disassembly and reassembly. Having a proper wheel alignment will ensure proper vehicle control during on and off-road driving conditions, as well as help maintain even treadwear over your expensive tire investment.

I NEED HELP, WHAT CAN I DO? Heavy Metal reserves the right to make changes to the material, design, and specifications of the replacement item without prior notice. The item "For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4" is in sale since Thursday, October 4, 2018.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "heavymetal-suspensions" and is located in La Mirada, California. This item can be shipped worldwide.

  • Blocks Specs: 9/16Th Pin, 5.8" Long x 2.5" Wide Blocks
  • U-Bolt Specs: Square 15.75" Long x 3.25" Wide 3.95" 5/8" Threads
  • Color: Black
  • Finish: Corrosive Protecting Coating
  • Compatibility: Dodge Ram 2500 / 3500
  • Lift Height: 3.5" Front + 3" Rear
  • Interchange Part Number: 60803 Strut Spring Spacers Blocks U-Bolts Inch
  • Adjustable: No
  • Manufacturer Part Number: 60803
  • Part Type: Suspension Lift Kit
  • Included Hardware: Mounting Hardware
  • Placement on Vehicle: Left
  • Other Part Number: 60803 Inch Leveling Kit Full Kit 2000 1999 1998
  • Brand: Heavy Metal Suspensions
  • Fitment Type: Performance/Custom
  • Non-Domestic Product: No
  • Drive Type: 4WD 4x4
  • Installation: Easy / DIY Instructions / No Special tools
  • Manufacture: Precision HD plasma CNC cut
  • Material: Carbon Steel
  • Spacer Specs: 3.5" Lift Height / 3.5" (89mm) Thickness


For Dodge Ram 2500 / 3500 Lift Kit 3.5 Front + 3 Rear 1994-2002 4WD 4X4